How to Connect to the Rover's Access Point

To connect to Raph Rover, turn it on by holding the power button located on the side of the rover for 1.5 seconds. The LEDs should light up green. After about 30 seconds the router should be operational and the access point should be up.

After the rover is powered on, you can connect to its Wi-Fi network. Default credentials are:

SSID: Raph-XXXX-2G (or Raph-XXXX-5G for 5 GHz)
Password: fictionlab

note

The XXXX stands for a unique identifier specific to your Rover's computer.

For instructions on how to change the WiFi network credentials, you can visit this page:

📄Configure the Router

Learn how to configure the RUTX10 router on your Raph Rover. This guide covers changing the SSID, password, country code, and wireless channel.